Sound - Microphones

AUDIX TM1-PLUS Measurement Mic Inc Windshield Shock Mount and Software

AUDIX TM1-PLUS Measurement Mic Inc Windshield Shock Mount and Software The TM1 Plus is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use, and affordability. Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 condenser microphone is designed to capture acoustic measurements for room analysis software programs, real-time analyzers, and other sound control devices. With a flat frequency range of 20 Hz – 20 kHz, the TM1 is an excellent tool for sound engineers, sound companies, and recording enthusiasts. The TM1 omnidirectional test and measurement microphone is designed, machined, assembled, and tested by Audix in the USA. The TM1 Plus includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter. General Transducer Type: Pre-polarised Condenser Frequency Response: 20 Hz - 25 kHz +/-2 dB Polar Pattern: Omni Output Impedance: 200 ohms Sensitivity: 6 mV / Pa @ 1k Maximum SPL: 130 dB with distortion <1% 140 dB Max Signal to Noise Ratio: 66 dB Equivalent Noise Level: 28 dB (A weighted) Dynamic Range: 112 dB Connector: male XLR Power Requirements: 18-52 V phantom Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector Physical Materials / Finish: 4 piece precision machined brass / Nickel Finish Weight 132 g / 4.7 oz Length 150 mm / 5.9 in