Sound-Stage Box
Yamaha TIO1608-D2 I/O Rack Stagebox with Dante 16in /8out 96KHz
Yamaha TIO1608-D2 I/O Rack Stagebox with Dante 16in /8out 96KHz Sampling frequency rate: External: 44.1kHz, 48kHz, 88.2kHz, 96kHz Signal delay: Less than 1.3ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=96kHz; Less than 2.6ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz Total harmonic distortion: Less than 0.2% +4 dBu@20Hz-20kHz into 600Ω, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=88.2kHz, 96kHz; Less than 0.1% +4 dBu@20Hz-20kHz into 600Ω, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18 dB/octave filter @80kHz Frequency response: +0.5, -1.5 dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT Dynamic range: 108 dB, INPUT to OUTPUT, Gain=-6 dB / 110 dB, DA Converter, Fs 96kHz; 108 dB, INPUT to OUTPUT, Gain=-6 dB / 112 dB, DA Converter, Fs 48kHz Hum & noise level: Equivalent input noise -128 dBu, Gain=+66 dB, Fs 96kHz, 48kHz *Measured with A-weighting filter Residual output noise: -86 dBu, Fs 96kHz / -88 dBu, Fs 48kHz, ST main off *Measured with A-weighting filter Crosstalk: -100 dB, adjacent INPUT/OUTPUT channels, Input Gain = -6 dB *Measured with a -30 dB/octave filter @22kHz Heat dissipation: 100-240V, 50/60Hz, 43.5kcal/h Power requirements : 100-240V, 50/60Hz Power consumption: 50W Dimensions: W: 480mm (18.9”) H : 88mm (3.5”) D: 364mm (14.4”) Net weight: 5.7kg (12.6lbs) Accessories: Owner’s Manual, Power Cord (2.5m), Rubber stoppers (4) Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃ Analog Output Characteristics Output Terminal: OUTPUT 1-8 Actual Source Impedance: 75 Ohms For use With Nominal: 600 Ohms Lines Output Level: Nominal: +4 dBu (1.23V) Max. before clip: +24 dBu (12.3V) Connector: XLR-3-32 type *1 Balanced/unbalanced: Balanced Analog Input Characteristics Input Terminals: INPUT 1-16 GAIN: +66 Db -6 Db Actual Load Impedance: 7.5kOhms For Use with Nominal: 50-600 Ohms Mics & 600 Ohms lines Input Level: Sensitivity: -82 dBu (61.6μV) +10 dBu (245Mv) Nominal: -62 dBu (0.616mV) +10 dBu (2.45V) Max before clip: -42 dBu (6.16mV) +30 dBu (24.5V) Connector: Combo Jack (XLR-3-31 type *2 or TRS phone *3) Balanced/Unbalanced: Balanced Digital Input and Output Characteristics Terminal: Primary/Secondary Format: Dante Data Length: 24bit or 32bit Level: 1000Base-T Audio: 16ch (Tio1608-D2 to other devises) 8ch (Other devises to Tio1608-D2) Connector: etherCON Cat5e